License: Creative Commons License Open Access by Open Journal of Biotechnology & Bioengineering Research is licensed under a Creative Commons Attribution 4.0 International License. Based on a work at SciRes Literature..

Manuscript should be submitted in Word Document (.doc or .docx) through online form or can be mailed to the particular journal's E-mail ID or to submit@scireslit.com, scireslit@gmail.com

Articles

We publish a wide range of article types in the Medical and Clinical Groups.

Our Vision

SciRes Literature main aim is to enhance the importance of science and technology to the scientific community and also to provide an equal opportunity to seek and share ideas to all our researchers and scientists without any barriers to develop their career and helping in their development of discovering the world.

Author Feedback

Author Guidelines

The SciRes Literature. Open Access Journals invites authors from all over the world to contribute their innovative and quality research and findings. The articles contributed to SciRes Literature. enjoy more visibility and are peer reviewed as well.

Authors can submit their works on any topics based on their research interest and expertise. SciRes Literature. only shares high quality and novel content and there is no scope or support of copied or plagiarized content here.

Authors can submit articles on any topic relevant to science and technology. The article should be unique, original and the presentation must be of genuine and potential interest to the scientific community.

You can submit your original research papers also. These research articles must be innovative, original and also in the major field of science. The research articles can consist of the findings and the methodology you used. You can also compile your evidences that lead to your conclusions.

We are also welcoming authors to join as our Potential Editorial Team. If you are an expert in your field of work, you can contribute by joining the SciRes Literature. Open Access Journals.


By submitting your articles to SciRes Literature., you get:

  • True and fair impartial peer review on your article with helpful criticism.
  • Visibility for your manuscripts from all over the world.
  • Facilitate and suggestions for improving your quality of the work.


The rules for content submission


Plagiarism Check

We do not encourage plagiarism in any form. So, we strictly recommend you to verify your article content before you submit article to any of our scholarly journals. We will check the plagiarism through online plagiarism software tools to reduce additional complications. The manuscript submitted should be unique and original. Authors should submit a cover letter along with the work. The cover letter should contain the names of the co authors of the content. It also must include the sources of the citation if used any.

Manuscript should be submitted in Word Document (.doc or .docx) through online platform or can be mailed to the particular journal's E-mail ID or to submit@scireslit.com


Article Guidelines

We suggest the authors to read this article formatting guidelines to prepare an article for submissions under SciRes Literature.


Manuscript Title

The title should be limited to 25 words or less and it should not contain abbreviations. The title should be a brief phrase describing the contents of the work.


Author Information

The author should provide complete names and affiliations along with contact details of corresponding authors and co-authors i.e., Telephone, Fax and E-mail address.


Abstract

The abstract should be informative and completely self-explanatory, briefly present the topic, include the scope of the experiments, and indicate significant data, and also the major findings and conclusions. Summarize the complete abstract in 300 words or less. Use a standard nomenclature and avoid abbreviations. The classified format of abstract should contain a description of the study background, methods, results and conclusion. Below the abstract, a list of keywords and abbreviations should be included.


Text

Introduction: The introduction should place the quality of the paper by providing a clear statement of the study, the appropriate literature on the study topic and the proposed approach or solution. The introduction should be general to attract a reader's attention from a wide range of scientific disciplines.

Materials and Methods: This section should provide a complete overview of the design of the study. Detailed descriptions of materials or participants, comparisons, interventions and types of investigation should be mentioned. However, only new procedures should be described in detail; previously published procedures should be cited and essential modifications of published procedures should be mentioned in brief. Capitalize manufacturer's names and trade names and address.

Results: Provide all over details of the experiment that are necessary to support the conclusion of the study. The results must be written in the past tense when describing findings in the article. Earlier published findings must be written in the present tense. Results and discussion may be combined or in a separate section. Speculation and detailed interpretation of data should not be integrated into the results but should be placed into the discussion section.

Acknowledgement: This section includes acknowledgment of, grant details, people funds, etc.

Note: In case author fails to submit his/her article as per the above instructions and information, kindly maintain clarity in titles, headings and subheading.

References: Only published or accepted chapters/articles should be incorporated in the references list. Conference talks, Meetings, abstracts, articles that have been submitted but not accepted should not be cited. All personal communications should be supported by a letter from the relevant authors.

SciRes Literature. uses the numbered citation (citation-sequence) method. References should be numbered and listed in ascending order that they appear in the body of the article. In the body, citations should be indicated by the reference numbers in square brackets. Multiple citations contained in a single set of brackets should be separated by commas. When there are three or more citations, should be given as a range. Ex: Diabetes Mellitus and psychiatric symptoms are two a major global public health problem which is increasing dramatically in developed and developing countries [1,4-8,28]". Make sure the content in the chapter is in the proper order for the e-book before ordering the citations. Figure and tables should be at the end of the article.

Authors should provide at least one online link in the references as following (preferably PubMed). Correct formatting of the references is important. Please use the following method for the reference list.


Examples for references

Simone V, Brunetti O, Lupo L, Testini M, Maiorano E, Simone M, et al. Targeting Angiogenesis in Biliary Tract Cancers: An Open Option. Int J Mol Sci. 2017; 15: 1-8.

Pappalardo F, Brusic V, Pennisi M, Zhang G. Advances in Computational Immunology. Bioinformatics. 2015; 9: 1-10

Note: Please list the first six authors and then include "et al." if there are additional authors.


Tables

Should be used at a minimum and designed in a simple manner. We strongly support authors to submit tables in .doc format. Tables are to be typed including headings and footnotes. Each and every table should be in a separate page and numbered consecutively in Arabic numerals and supplied with a legend. Tables should be self-explanatory without reference to the body. If possible, the details of the methods used in the experiments should be described in the legend instead of in the text. The similar data should not be included in tables and graph form or repeated in the content. Cells can be copied from an Excel sheet and pasted into a word document, should not embed the Excel files as objects.

Note: PDF format of the article should be requested to submit in a doc format, in order to help in the completion of procedure successfully.


Figures

Photographic images or file formats are in .doc, JPEG and TIFF. If you have designed images with separate components on different layers, kindly submit us the Photoshop files.

Use Arabic numerals to classify figures and upper case letters for their parts and should be in parentheses (Figure 1). Maintain each legend with a title and include an adequate description so that the figure is clear without reading the text of the chapter. Information given in legends should not be repeated in the body.


Figure legends

Figures legends should be in numerical order on a separate document.


Equations as Graphics

If equations can be encoded in MathML, also submit them in TIFF or EPS format as distinct files (i.e., a file containing only the information for one equation). Only when tables cannot be encoded as XML/SGML can they be submitted as graphics. If this method is used, it is critical that the font size in all equations and tables is consistent and legible throughout all submissions.

Suggested Equation Extraction Method
Table Specifications
Equation Specifications
Supplementary Information
Discrete items of the Supplementary Information (for example, figures, tables) referred to at an appropriate point in the main text of the chapter.
Summary diagram/figure included as part of the Supplementary Information (optional).
All Supplementary Information is supplied as a single PDF file, where possible. File size within the permitted limits for Supplementary Information. Images should be a maximum size of 640 x 480 pixels (9 x 6.8 inches at 72 pixels per inch).


Proofs and Reprints

Electronic proofs will be sent as an E-mail attachment to the corresponding author as a PDF file. Page proofs are considered to be the final version of the chapter. With the exception of typographical or minor clerical errors, no changes will be made in the chapter at the proof stage. Authors will have free electronic access to the full text (HTML and PDF) of the chapter. Authors can freely download the PDF file from which they can print unlimited copies of their chapters.


Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).

The submission file is in Open Office, Microsoft Word, RTF, or WordPerfect document file format.

Where available, URLs for the references have been provided.

The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.

The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.


Copyright Notice

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).


Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

  Authors submit all Proposals and manuscripts via Electronic Form! Submit a Manuscript!